Playing Records; Basic Operation; When Playback Finishes - Teac TN-550 Mode D'emploi

Playing records

1
Press the STANDBY/ON button on the
back of the unit to turn it on.
2
Open the turntable cover slowly.
V Be careful not to pinch your hand, for
example, when opening and closing
the turntable cover.
3
Raise the cartridge protector.
Protector
4
Place a record on the turntable.
When playing a 45 RPM large-hole single record, use
the included adapter.

Basic operation

5
Set the RPM according to the record
and start the turntable.
The rotation speed can be set to 33 1/3 or 45 RPM.
6
Raise the arm lifter.
Arm lifter
Tone arm
o You can also move the tone arm to above the
record without raising the arm lifter and then
slowly lower the tone arm to start playback.
7
Move the tone arm to the edge of the
record or the track where you want to
start playback.
8
Lower the arm lifter.
Lower the tone arm slowly until the stylus touches the
record and playback begins.
o We recommend that you close the turntable cover
during record playback to avoid dust.
V Do not place anything on top of the
turntable cover.
CAUTION
o During playback, do not touch the tone arm or the rotat-
ing record.
o Do not stop turntable rotation during playback.
During record playback, feedback could occur if the
volume is too loud. If this happens, lower the volume
of the amplifier.

When playback finishes

1
Raise the arm lifter to separate the
needle from the record, and return the
tone arm to its original position.
Arm lifter
Tone arm
2
Turn the rotation speed setting knob
to 0 to stop the turntable.
9