OxyGo OX1400 Manuel D'utilisation page 18

8. Position the nasal cannula on your face and breathe through your nose.
The OxyGo will sense the onset of inhalation and deliver a burst
of oxygen at a precise time when you inhale. The OxyGo will sense
each breath and continue to deliver oxygen in this manner. As
your breathing rate changes, the OxyGo will sense these changes
and deliver oxygen only as you need it. At times, if you inhale very
quickly between breaths the OxyGo may ignore one of the breaths,
giving the appearance of a missed breath. This may be normal as
the OxyGo senses and monitors the changes in your breathing
pattern. The OxyGo will normally sense the next breath and deliver
oxygen accordingly.
A green light will flash each time a breath is detected. Make certain that the nasal
cannula is properly aligned on your face and you are breathing through your nose.
WARNING If you begin to feel ill or are experiencing discomfort while using
! C
CAUTION
General
To remove power, unplug the input cord from its source (i.e., AC wall outlet, DC car
cigarette lighter adapter) and disconnect it from the OxyGo.
CAUTION Ensure the power supply is powered from only one power source
14
this device, consult your physician immediately.
The OxyGo is designed to provide a flow of high purity oxygen. An advisory
alarm, "Oxygen Low", will inform you if oxygen concentration drops. If
alarm persists, contact your equipment provider.
(AC or DC) at any given time.