Dyna-Glo DGN486DNC Mode D'emploi page 12

ASSEMBLY INSTRUCTIONS
19. Attach charcoal tray (S) to inside of lid and
firebox assembly (B) using four M6x12 bolts (AA).
Hardware Used
M6x12 Bolt
AA
20. Place one small grate (Y) onto the far left side
of grate frame inside the lid and firebox
assembly (B). Slide to Right of grill.
21. Place a second small grate (Y) on the lower
grate frame of the lid and firebox assembly (B)
(far left side). Place the big grate (T) on the
upper grate frame of the lid and firebox
assembly (B) as shown.
x 4
20
21
12
Y
Y
T
B
Y
B