Dyna-Glo DGN486DNC Mode D'emploi page 11

ASSEMBLY INSTRUCTIONS
16. Attach temperature gauge (X) to lid and firebox
assembly (B) using pre-assembled nut .
17. Attach lid handle assembly (C) to lid and firebox
assembly (B) using two M6x12 bolts (AA).
Hardware Used
M6x12 Bolt
AA
18. Thread crank handle (F) into lid and firebox
assembly (B). Secure with one cotter pin (FF).
Hardware Used
FF Cotter Pin
16
17
x 2
x 1
11
X
B
C
B
AA