How to Use
This appliance is for household use only.
GETTING STARTED
• Remove all packing materials, any stickers and the plastic band around
the power plug.
• To register your product, go to www.prodprotect.com/russellhobbs.
• Wash all parts as instructed in CARE and MAINTENANCE section.
• Select a level surface where this unit is to be used allowing enough space
for steam to escape without damage to counters, cabinets and walls.
• Set the browning level to maximum (6). Operate the appliance empty,
to cure the new elements. This may smell a bit, but it's nothing to worry
about. Ensure the room is well ventilated.
PARTS
1.
toasting slots
2.
lever
3.
browning control
4.
crumb tray (part no. TR9150-01 )
TOASTING BREAD
1.
Set the toaster upright on a firm, level, heat-resistant surface.
2.
Put the plug into the power socket.
3.
Turn the browning control to the required setting (1 = light, 6 = dark).
4.
Put bread into the toasting slots (maximum thickness 25mm).
5.
Press the lever down fully. It won't lock down unless the toaster is
connected to the electricity supply.
6.
The toasting time gauge will show the toasting time and start to
count down.
When it reaches 0, the toast will pop up.
7.
8.
To stop toasting, press the
FROZEN BREAD
1.
Leave the browning control at your favoured setting, insert the frozen
bread, lower the lever, then press the
2.
The
light will come on, and the toasting time will be altered
automatically to give the same degree of browning you get with
unfrozen bread.
3.
The toasting time gauge will show the toasting time and start to count
down.
When it reaches 0, the toast will pop up.
4.
5.
warming rack
(part no. TR9150-02 )
6.
handle
7.
toasting time gauge
button.
button.
5