Before Locating The Fixing Brackets; Adjusting The Bracket Position - EAS ELECTRIC EMIH280-3F Manuel D'instructions

If the hob is installed above a drawer or cupboard space, a thermal protection barrier

is installed below the base of the hob.
The isolating switch is easily accessible by the customer.


9.4 Before locating the fixing brackets

The unit should be placed on a stable, smooth surface (use the packaging). Do not apply
force onto the controls protruding from the hob.

9.5 Adjusting the bracket position

Fix the hob on the work surface by screw 2 brackets on the bottom of hob(see picture) after
installation. Adjust the bracket position to suit for different table top thickness.
Under any circumstances, the brackets cannot touch with the inner surfaces of
the worktop after installation (see picture).
23
V.3