Trisa 7713 Mode D'emploi page 32

Preparation of ice cream in the removable aluminium tank
1. Place the empty removable aluminium tank
(6) in the fixed stainless steel tank (16) of
the device.
2. Connect the lid (3) and the drive housing (2)
with the connection bolt (4).
3. Place the beater (5) in the intended opening
of the drive housing.
The beater must be in a loose position.
4. Put on the drive housing (2) in a way so that
the plug connection on the drive housing (2)
is placed opposite the fixed plug connection
(7) of the device. Turn the lid clockwise that
the plug connections click into each other
and the locking device will click into place.
If the plug connection is not connected
properly, the drive motor will not work
- 30 -