Before Initial Use; First Use - Trisa 7713 Mode D'emploi

Before initial use

Please check already when unpacking the device if all accessory parts, as stated in the
instruction manual, are included and if the device is not damaged.
Cleanness and hygiene are very important when processing food. Wash up all parts that
come into contact with ice cream (stainless steel and aluminium tank, beater and lid) and
dry them carefully.
Attention!
During transportation the device may have been fallen over or put upside down - the
cooling liquid then may be spread out in the cooling cycle and the compressor may
not work.
Place the device on an even surface for 12 hours so that the cooling liquid will accu-
mulate. Please also repeat this process if the device will be in wrong position in the
future.

First use

Connect mains plug. (Only connect to alternating current with a voltage of 230 Volt).
Always place the device on a solid and even surface.
The ventilation opening on front and back must not be covered.
20cm
Keep a distance of at least 20 cm.
20cm
Use
Attention
- Please always use only fresh and impeccable ingredients when making ice cream.
- Fruits must always be fresh and washed.
- Ingredients should be pre-cooled for processing.
- Never fill hot ingredients into the device!
- 29 -