Trisa 7713 Mode D'emploi page 36

Right after, new ice cream can be made again. Keep the cooling working and fill in the new
mixture into the empty removable tank or into the fixed tank and continue the procedure.
Remark
Never leave ice cream with the device with running cooling compressor,
because the ice cream will freeze to the device.
Preparation of ice cream in the fixed tank
Preparation of 2 different kinds of ice-cream
First prepare ice cream in the removable tank (6). When this procedure is finished you can
fill in the second mixture directly into the fixed tank and execute the procedure as mentio-
ned above.
When the preparation of the ice cream is finis-
hed, switch off the cooling ON / OFF switch,
disconnect the mains plug and carefully clean
the device.
1. Place the device on an even and solid sur -
face.
Remove the empty removable aluminium
tank (6) from the stainless steel tank (16) of
the device.
Directly fill in the mixture into the fixed tank.
Now you may proceed as stated in the pro-
cedures 2 - 12 that are mentioned above.
- 34 -