Atag HG6111P Mode D'emploi page 41

INSTALLATION INSTRUCTIONS
Building in dimensions
625
min. 50
490
Back
GB 18
Building in
510
45
560
Front
voorzijde
INSTALLATION INSTRUCTIONS
Space to be left free around the appliance
A hob generates heat. Leave a sufficient distance between the
appliance and non heat-resistant materials. Take care also with
materials that may discolour (such as stainless steel).
min. 650 mm
min. 450 mm
min. 100 mm
The gas hob may only be built in next to one vertical wall.
Please note
The bottom of the hob becomes hot. Do not place combustible items
in a drawer if the drawer is fitted directly below the hob.
Install appliance and make connections
Place the appliance in the worktop and secure it using the
mounting brackets and screws supplied.
Connect to the gas supply.
Check with soap suds that the connection is gastight.
Connect the appliance to mains electricity.
Building in
min. 600 mm
min. 100 mm
GB 19