Building In - Atag HG6111P Mode D'emploi

INSTALLATION INSTRUCTIONS
If the connecting cable is damaged, it may only be replaced by the
manufacturer, the manufacturer's service organisation or equivalently
qualified persons, in order to avoid dangerous situations.
Preparing the hob
Fit the elbow supplied on the appliance's gas connection.
1/2" ISO 228 (straight)
1/2" ISO 10226-1 (conical)
Sealing ring
Only for France
1/2" ISO 228 (straight)
1/2" ISO 2280 (straight)
Sealing ring
Cut opening in worktop
Saw the opening in the worktop. This should be done very
accurately (see building in dimensions).
If the woodtop is made of treated wood, then coat the sawn
surfaces of the top with sealing varnish, to prevent moisture
causing the top to swell.
GB 16

Building in

INSTALLATION INSTRUCTIONS
Attachment points for mounting brackets
Threaded hole /screw / worktop
Thin worktops
Thick worktops
GB 17
Building in