BRASSELER USA BRiO450 Mode D'emploi page 6

OPERATION
BRIO 450 / BRiO 450L / BRiO 450KL
Connecting Coupler (Fig. 2)
1. Align tubes and pins on coupler with holes in delivery system tubing.
2. Thread tubing nut to bottom of coupler.
3. Hold coupler and finger tighten nut.
Connecting Handpiece (Fig. 3)
1. Slide handpiece onto coupler.
2. Press firmly until it snaps into place.
Note: Handpiece should swivel freely with slight tension and sit
flush on coupler.
Removing Handpiece (Fig. 3)
Hold ring on coupler and pull handpiece straight off.
Note: Do not hold or pull on hose.
Release Ring
Fig. 2
Fig. 3