Connecting To An Audio System (Hdmi Supported Amplifier) - Samsung BD-P1200 Manuel D'utilisation

Connecting to an Audio System
(HDMI supported Amplifier)
1. Using the HDMI-HDMI cable (not included), connect
the HDMI OUT terminal on the rear of the Blu-ray disc
player to the HDMI IN terminal of your Amplifier.
2. Using the HDMI-HDMI cable connect the HDMI OUT
terminal of the Amplifier to the HDMI IN terminal of
your TV.
3. Turn on the Blu-ray disc player, TV, and Amplifier.
4. Press the input select button of the Amplifier to select
external input in order to hear sound from the
Blu-ray disc player. Refer to your Amplifier's user
manual to set the Amplifier's audio input.
LAN
Please turn the volume down when you
turn on the Amplifier. Sudden loud sound
NOTE
may cause damage to the speakers and
your ears.
Please set the audio in the menu screen
according to the Amplifier.
(See pages 38~39)
The position of terminals may vary
depending on the Amplifier.
Please refer to the user's manual of your
Amplifier.
22 - English
Connecting to Samsung's
FTP/Internet site for Software
Upgrades
1. Using the Direct LAN Cable (UTP cable), connect the
LAN terminal on the rear of the Blu-ray disc player to
the LAN terminal of your modem.
- Connect to the Internet for future software upgrades.
LAN
INTERNET
See pages 45~48 for the Software Upgrade
procedure.
NOTE
LAN
Modem