Troubleshooting; Control Display - Samsung NV51 5 S Serie Manuel D'utilisation

Maintaining your appliance
34 English
NV51R5511S_AA_DG68-01125A-02_EN+MES+CFR.indb 34
2. While holding the glass cover with one
hand, insert a flat-sharp tool such as a
table knife between the glass and the
frame to remove the glass cover.
3. Turn the bulb cap counterclockwise to
remove.
NOTE
If necessary, remove the metal rings and
clean the bulb cap.
4. Replace the bulb.
5. Place the bulb cap and glass cover back
into their position.
6. Return the broil heater back by
following step 1 in reverse order.
CAUTION
Before changing your oven light, disconnect
the electrical power to the oven at the main
fuse or circuit breaker panel. Make sure the
oven and the halogen bulb are cool.

Troubleshooting

Troubleshooting
Samsung works hard to ensure that you don't have problems with your new
electric oven. If you run into unexpected trouble, look first for a solution in the
tables below. If you're still having trouble after trying the suggested solution, call
Samsung at 1-800-SAMSUNG (726-7864).

CONTROL DISPLAY

Problem Possible cause
The display A fuse in your home may be
goes blank. blown or the circuit breaker
tripped.
The buttons • There is foreign matter
cannot be caught between the
pressed buttons
properly. Touch model: There is
•
moisture on the exterior
• The lock function is set
Solution
Replace the fuse or reset the
circuit breaker.
• Remove the foreign
matter and try again.
• Remove the moisture and
try again.
• Check whether the lock
function is set.
11/5/2019 10:24:36 AM