Installing Windows - ASROCK A780GMH/128M Mode D'emploi

12 24
on
1 13
2 . 9 2 . 9 Driver Installation Guide Driver Installation Guide
2 . 9 2 . 9 Driver Installation Guide 2 . 9 Driver Installation Guide Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2 . 1 0 2 . 1 0

2 . 1 0 Installing Windows

2 . 1 0 2 . 1 0 Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista Vista Vista Vista 64-bit W 64-bit W 64-bit W 64-bit W 64-bit W ith RAID F ith RAID F ith RAID Functions ith RAID F ith RAID F
TM TM TM TM TM
If you want to install Windows ® XP / XP 64-bit / Vista
/ SATAII HDDs with RAID functions, please refer to the document at the following path
in the Support CD for detailed procedures:
..\ RAID Installation Guide
2 . 1 1 2 . 1 1 2 . 1 1 Installing Windows 2 . 1 1 2 . 1 1 Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista Vista Vista Vista 64-bit W 64-bit W 64-bit W ithout RAID F 64-bit W 64-bit W ithout RAID Functions ithout RAID F ithout RAID F ithout RAID F
TM TM TM TM TM
®
If you want to install Windows XP, Windows
TM
Vista 64-bit OS on your SATA / SATAII HDDs without RAID functions, please follow
below procedures according to the OS you install.
2.11.1 Installing Windows 2.11.1 Installing Windows 2.11.1 Installing Windows 2.11.1 Installing Windows 2.11.1 Installing Windows
F F F F Functions unctions unctions unctions unctions
If you want to install Windows ® XP or Windows
without RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE].
®
STEP 2: Install Windows XP / Windows
2.11.2 Installing Windows 2.11.2 Installing Windows 2.11.2 Installing Windows 2.11.2 Installing Windows 2.11.2 Installing Windows
RAID Functions RAID F RAID F RAID F RAID F unctions unctions unctions unctions
If you want to install Windows ®
SATAII HDDs without RAID functions, please follow below steps.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Install Windows ® Vista
ASRock A780GMH/128M
XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista
® ® ® ® ®
unctions unctions unctions unctions
TM / Vista TM 64-bit on your SATA
XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista
® ® ® ® ®
unctions unctions unctions unctions
® ®
XP 64-bit, Windows
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
® ® ® ® ®
® XP 64-bit on your SATA / SATAII HDDs
Advanced screen IDE Configuration.
®
XP 64-bit OS on your system.
Vista Vista Vista Vista Vista / Vista / Vista / Vista / Vista / Vista 64-bit Without 64-bit Without 64-bit Without 64-bit Without 64-bit Without
® ® ® ® ® TM TM TM TM TM TM TM TM TM TM
Vista TM or Windows ® Vista TM 64-bit on your SATA /
Advanced screen IDE Configuration.
TM / Vista TM 64-bit OS on your system.
Motherboard
/ / / / /
TM TM TM TM TM
/ / / / /
TM TM TM TM TM
TM ®
Vista or Windows
2 7 2 7 2 7 2 7 2 7