ASROCK A780GMH/128M Mode D'emploi page 28

Using SATA / SATAII HDDs with NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [AHCI].
STEP 2: Install Windows
®
Insert the Windows Vista
to boot your system, and follow the instruction to install Windows
Vista TM 64-bit OS on your system. When you see "Where do you want to install Windows?
" page, please insert the ASRock Support CD into your optical drive, and click the "Load
Driver" button on the left on the bottom to load the AMD AHCI drivers. AMD AHCI drivers
are in the following path in our Support CD:
(There are two ASRock Support CD in the motherboard gift box pack, please
choose the one for Windows
.. \ I386 (For Windows
.. \ AMD64 (For Windows
After that, please insert Windows
the optical drive again to continue the installation.
2 . 1 2 2 . 1 2 Untied Overclocking T 2 . 1 2 Untied Overclocking T Untied Overclocking Technology Untied Overclocking T
2 . 1 2 2 . 1 2 Untied Overclocking T
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter "Overclock Mode" option of BIOS setup
to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is untied
during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate
under a more stable overclocking environment.
Please refer to the warning on page 8 for the possible overclocking risk
before you apply Untied Overclocking Technology.
2 8 2 8 2 8
2 8 2 8
ASRock
Advanced screen
® TM TM
Vista / Vista 64-bit OS on your system.
TM ® TM
/ Windows Vista 64-bit optical disk into the optical drive
® Vista TM / Vista TM 64-bit.)
® Vista TM OS)
® Vista TM 64-bit OS)
® TM
Vista / Windows
echnology echnology echnology
echnology
A780GMH/128M Motherboard
IDE Configuration.
® TM
Vista / Windows
® TM
Vista 64-bit optical disk into
®