POWER SMITH PWLR1120F Manuel De L'opérateur page 5

ON/OFF SWITCH
The work light is equipped with an ON/OFF switch (7). Press the switch once to turn the work light on and press the
switch a second time to turn it off.
NOTE:
The work light is always on its brightest setting when switched on.
CHANGING THE LIGHT MODE
The work light has a separate mode selection button switch (8). Press the switch to change the light mode: High,
Medium, Low and Flashing.
USB OUTPUT
Your work light has a USB output (9). You may use it to charge other portable devices using a USB cable (not included).
NOTE:
The USB port is for power output only and cannot be used to charge the light.
WARNING:
may impair the function and/or safety and could affect the life of the product. There are specific
applications for which the work light was designed.
There are no user-replacable parts. Periodically inspect the condition of adaptors, connectors and wires. Contact the
manufacturer to replace any components that have become worn or broken.
12V DC ADAPTOR FUSE REPLACEMENT (FIG 4)
The fuse in the plug end of the 12V DC adaptor protects the adaptor's charging circuit. If the 120V AC adaptor works,
but the 12V DC adaptor does not, then the fuse may be burned out (blown).
To Replace the Fuse
1. Unscrew the red end cap (13A) off the DC plug.
2. Remove the center contact and fuse (13B).
3. Check to see if the fuse is burned out. The fuse is burned out
when the fuse element is missing or broken inside the glass.
4. Replace with a new 4A fuse if fuse element is missing or
broken. NOTE: Use a 4A fuse only.
5. Screw the end cap and center contact back on until finger tight--Do not over-tighten.
This product is warranted free from defects in material and workmanship for 2 (Two) years after date of purchase. This
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please
call the Toll-Free Help Line for possible solutions.
For questions about this or any other PowerSmith™ product,
888-552-8665.
Please call Toll-Free:
www.powersmithproducts.com
Or visit our website:
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper
English
MAINTENANCE
Do not modify the work light in any way. Unauthorized modification
WARRANTY
HELP LINE
5
FIG 4
13
13A
13B