Dial Number - JVC KD-DB95BT Manuel D'instructions

BLUETOOTH®
1 Turn the volume knob to select a number (0 to 9) or character ( , #,

DIAL NUMBER

+).
2 Press S / T to move the entry position.
1
Repeat steps
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command to
control the phone functions. ( Use Voice Recognition)
SETTINGS
AUTO ANSWER 01 SEC — 30 SEC: The unit answer incoming call automatically in the
selected time (seconds). ; OFF: Cancels.
RING TONE IN UNIT: The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
• CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming
calls.
• MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for
incoming text messages.
IN PHONE: The unit uses the connected phones' ring tone to notify you
when a call/text message comes in. (The connected phone will ring if it
does not support this feature.)
RING COLOR COLOR 01 — COLOR 29 (COLOR 06): Display zone will change to
the selected color during a call or when a text message comes in. ;
OFF : Cancels.
MSG NOTICE ON: The unit rings and "RCV MESSAGE" appears to notify you of an
incoming text message. ; OFF: Cancels.
Text message notification
When the phone receives a text message, the unit rings and "RCV
MESSAGE" appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
14
2
and until you finish entering the phone number.
Use Voice Recognition
1 Press and hold
The connected phone (which has been paired the earliest) is
activated. However, if priority device is connected, pressing and
holding activate the priority device. ( 15, PRIORITY)
2
Speak the name of the contact you want to call or the voice
command to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
Default: XX
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Select a contact by name
• You can search through the contacts quickly according to the first letter
(A to Z, 0 to 9, and OTHERS).
• "OTHERS" appears if the first character is other than A to Z, 0 to 9.
1 Press to enter Bluetooth mode.
2
Turn the volume knob to select [PHONEBOOK], then press the knob.
3 Press 1 K / 2 J to select the desired letter.
4
Turn the volume knob to select a name, then press the knob.
5
Turn the volume knob to select a phone number, then press the
knob to call.
To return to the previous setting item or hierarchy, press G T/P.
Store a contact in memory
You can store up to 5 contacts.
1
Press to enter Bluetooth mode.
2 Turn the volume knob to select [RECENT CALL], [PHONEBOOK], or
[DIAL NUMBER], then press the knob.
3
Turn the volume knob to select a contact or enter a phone number.
If a contact is selected, press the volume knob to show the phone
number.
.