Icons And Functions Of The Camera Control Toolbar - Optika Italy H Serie Manuel D'utilisation

6.2

Icons and Functions of the Camera Control Toolbar

Icon
Zoom In the Video Window
Reset Zoom to Original 1X
Vertical Flip
Compare Image with the current video
Browse Images and Videos in the SD Card
Check the ProView Version
The Setting function is relatively more complicated than the other functions. Here are more info about it:
Used for setting digits behind the decimal point for measurement results;
Global:
Calibration Line Width
Color
EndPoint
Point, Angle, Line, Horizontal Line, Vertical Line, Rectangle, Circle, Ellipse, Annulus, Two Circles, Polygon, Cur-
ve:
Left-click the beside the measuring patterns mentioned above will unfold the corresponding attribute settings
to set the individual property of the measuring objects.
Function
Figure 3 - Measurement Settings Page
Used for defining width of the lines for calibration;
Used for defining color of the lines for calibration;
Used for defining shape of the endpoints of lines for calibration.
Type:
Means no endpoints
Null:
Rectangle: Means rectangle type of endpoints. It makes alignment more easily
Icon
Zoom Out the Video Window
Horizontal Flip
Video Freeze
Display Cross Line
Settings
Page 9
Function