The Camera Control Panel - Optika Italy H Serie Manuel D'utilisation

12.1 The Camera Control Panel

The Camera Control Panel controls the camera to achieve the best image quality according to the specific ap-
plications. It will pop up automatically when mouse cursor is moved to the left side of the video window (in mea-
surement status, the Camera Control Panel will not pop up. Only when measurement process is terminated will
the Camera Control Panel pop up by moving mouse cursor to the left side of the video window).
Left-clicking button
Control Panel
to achieve Display/ Auto Hide switch of the Camera Control Panel.
Function
Snap
Record
Auto Exposure
Exposure
Compensation
Exposure Time
Gain
Red
Green
Blue
White Balance
Sharpness
Denoise
Saturation
Gamma
Contrast
DC
AC(50HZ)
AC(60HZ)
Default
Capture image from the current video window
Record video from the current video window
When Auto Exposure is checked, the system will automatically adjust
exposure time according to the value of exposure compensation
Available when Auto Exposure is selected. Slide left or right to adjust
the exposure compensation according to the current video brightness
to get the correct brightness value.
Available when Auto Exposure is unchecked. Slide to left or right to re-
duce or increase exposure time, adjusting brightness of the video
Adjust Gain to reduce or increase brightness of video. The Noise will be
reduced or increased accordingly
Slide to left or right to decrease or increase the proportion of Red in
RGB on video
Green is base for reference and cannot be adjusted
Slide to left or right to decrease or increase the proportion of Blue in
RGB on the video
Adjusting the White Balance according to the monitor display
Adjust Sharpness level of the video window
Adjust Noise level of the video window
Adjust Saturation level of the video window
Adjust Gamma level of the video. Slide to the right side to increase
gamma and to the left to decrease gamma
Adjust Contrast level of the video. Slide to the right side to increase
contrast and to the left to decrease contrast
For DC illumination, there will be no fluctuation in light source so no
need for compensating light flickering
Check AC(50HZ) to eliminate flickering "strap" caused by 50Hz illumi-
nation
Check AC(60HZ) to eliminate flickering "strap" caused by 60Hz illumi-
nation
Set all the settings in the Camera Control Panel to default values
Page 24
Description