Electrolux ICON Professional Serie Instructions D'installation page 5

MICROWAVE/ WALL OVEN COMBINATION
3 Remove all packaging inside the ovens and remove
the lower oven racks and their supports (see owner's
guide for further instructions).
4 Find the 2 mounting screws included in the literature
package.
5 Insert the unit into the cabinet opening. Slide unit
inward leaving 1½" (3.8 cm) clearance between the
unit and front of cabinet (see Figure 7).
6 Pull the armored cable through the hole for it in the
cabinet and toward the junction box while moving
the appliance inward.
7 Install the bottom trim using the screws supplied
with the unit (Figure 8).
IMPORTANT NOTE
Bottom trim must be installed for the oven to function
properly. DO NOT operate the oven without the
bottom oven trim installed.
INSTALLATION INSTRUCTIONS
1½" (3.8 cm)
clearance
between unit
Figure 7
Screws
supplied
8 Install now the center trim using the screws supplied
with the unit, on both sides (Figure 9).
5
Bottom Trim
Figure 8
Figure 9