golmar Vista Plus CD-PLUS/R5 Manuel D'installation page 36

TROUBLESHOOTING HINTS
Any mode
Nothing operates.
Remember that the system remains inactive for 45 seconds after connecting the power supply,
the same occurs upon connecting any unit to the installation.
Check the output power supply voltage between '
18,5Vd.c. If not, disconnect the power supply from the installation and measure again. If it's
correct now, it means there is a short circuit in the installation: disconnect the power supply
from mains and check the installation.
Check that 'A/D' terminal is not shortcircuited with '
Continuous audio feedback.
Check that 'A/D' terminal is not shortcircuited with other terminals.
There is no sound
Check that you have used the correct terminals (see diagrams on pages 30 to 33).
CONFORMIDAD/COMPLIANCE/CONFORMITÉ
Este producto es conforme con las disposiciones de las Directivas Europeas
aplicables respecto Compatibilidad Electromagnética 89/336/CEE, así como con la
ampliación en la Directiva del Marcado CE 93/68/CEE.
This product meets the essentials requirements of applicable European Directives
regarding Electromagnetic Compatibility 89/336/ECC, and as amended for CE
Marking 93/68/ECC.
NOTA: El funcionamiento de este equipo está sujeto a las siguientes
NOTE: Operation is subject to the following conditions:
golmar@golmar.es
www.golmar.es
Golmar se reserva el derecho a cualquier modificación sin previo aviso.
Golmar reserves the right to make any modifications without prior notice.
condiciones:
(1) Este dispositivo no puede provocar interferencias dañinas, y (2)
debe aceptar cualquier interferencia recibida, incluyendo las que
pueden provocar un funcionamiento no deseado.
(1) This device may not cause harmful interference, and (2) this device
must accept any received interference, including the ones that may
cause undesired operation.
Golmar se réserve le droit de toute modification sans préavis.
-
' and '+' terminals: it should have 17,5 to
-
' or '+' terminals.