System Requirements - KeySonic ACK-126 RF Mode D'emploi

1. Installation

1.1 System Requirements

This keyboard requires a PC with PS/2 connection and one of the following operating systems:
1.2 Installation of the USB receiver
In order to install your keyboard, please perform the following steps:
• Connect the USB receiver (USB dongle receiver) to a free USB
port on your computer. The LED in the USB receiver starts to glow
and signalises therewith, that the USB receiver is workable
connected with your PC.
Advise: Please ensure, that the USB receiver has a minimal
distance of 20 cm to metallic dividing walls, other computer cases,
monitors, ZIP drives, loudspeakers and switching power supplies.
• All state-of-the-art operating systems with Plug & Play support will
recognize your keyboard automatically and load the required drivers. During the phase of installation your
operating system informs you via changing Pop-up information windows on the task-bar about the current
status of installation. Please be patient, until the system informs you finally about the successful
installation. The USB receiver is now ready for operation.
Older operating systems not always support automatic recognition of USB or PS/2 devices. If you have
attached your USB receiver and exactly this error occurs on your system, you have the following alternatives
to solve the problem:
• Perform an update of your operating system and return to Step 1.2
• In some cases the installation CD of your operating system is necessary according to the instructions on
your screen. In this circumstance please follow these instructions.
• Under Windows 98/2000 the installation of the included driver on CD-ROM is necessary*. Please follow
the instructions on your screen after starting the driver CD.
• Check whether your BIOS system supports USB keyboards*. Some main board manufacturers offer
BIOS up-dates for download over the Internet.
• Ensure in your system settings, that the used USB connection was not deactivated in your operating
system*.
• Should your system-updates keep out of success, it is recommendable to test the keyboard with another
PC with the same operating system to rule out a hardware damage of the USB receiver.
* Please refer details to the manual of your PC
Version 1.0 (2007/10/09) ● © 2007 by MaxPoint Handelsgesellschaft mbH
Windows 98SE / ME / 2000 / XP / Vista
.
- 5 -