RiverRidge 06-187 Instructions D'assemblage page 9

STEP 3
1. Attach other side frame (2) to top board (1) and 3 shelves (3) by inserting 2 screws (A)
through holes on side frame (2) and tighten to front and back cross bars (4 & 5).
2. Insert 6 screws (A) through holes on side frame (2) and tighten screws (A) into each shelf (3).
STEP 4
1. Press 16 plastic caps (C) into screw holes on both side frames (2).
*Tip: If added pressure is needed to keep plastic caps in place – cover caps with a piece of paper
and tap lightly with hammer to secure cap.