Turning Off The Shirt Ironer - Siemens TJ10100 Mode D'emploi

Ironing/Airing
Warning!
Foreign objects (e.g. pens, clips) may
damage the garment and/or the ironing
dummy.
Do not air knitwear or elasticated
garments! They may loose shape.
Only air non-elasticated, cloth garments.
There are two ironing/airing programmes to
choose from: cold and
"Preparing your garments".
Empty all the pockets on the garment to be
aired.
Fit the garment onto the appliance and
secure it as described in the "ironing"
section. See "Use".
If the garment is a jacket, then it is not
necessary to secure the cuffs. Remove the
cuff adjusters if necessary.
Selected the desired airing programme with
the programme selector switch. See "Use".
Press "start/stop". The start/stop light lights
up. The ironing dummy inflates and the
airing process begins.
Remove the aired garment from the ironing
dummy.
The next garment can now be fitted onto
the appliance.
Use
hot, see Airing in
28

Turning off the shirt ironer

Turn the programme selector switch to "0".
Turn the shirt ironer off by pressing
Turn lifting knob 1, Fig. 1 anti-clockwise
while gripping the button band with the
other hand and pull it downwards. The
button band starts lowering.
Warning!
The shirt ironer may suffer damage. Make
sure that all the flaps are closed before
lowering the upper frame.
Make sure the ironing dummy and/or the
adjustment cords do not get hooked up.
Lower the appliance completely by pushing
the casing down until the upper part clicks
into its down position.
Storing your shirt ironer
There are two cable supports on the back of
the shirt ironer. 16, Fig. 2.
Wind the mains cable onto the wind pillar.
Secure the plug in position.
Take one of the cuff adjusters, fold the
inflatable sleeve and insert the adjuster
between the size adjustment cords so that
the cuff adjuster remains in a vertical
position. Repeat the process with the other
sleeve.
Fit the cover appliance over the top of the
shirt ironer. The pocket goes on the back.
Fit the rubber tightener on the cover
appliance into the guide on the lower frame
of the shirt ironer.
To transport the ironer, hold the handle 9
Fig. 2 and tilt the appliance backwards.
Transport the shirt ironer fully lowered to
the place where you wish to store it!
.