General Warnings; Important - REPA MATIC Serie Manuel D'instructions

MAINTENANCE

GENERAL WARNINGS

This chapter contains the complete list of requirements and of procedures referring to maintenance.
A good maintenance requires ordinary checks and inspections, performed directly by the operator and/or by skilled staff,
and periodic checks, including cleaning operations and replacement, performed by skilled staff.
During cleaning, maintenance or repair operations, be careful not to disperse the products used in the environment.
After all maintenance operations restore and correctly fasten all protection removed or opened
warning

IMPORTANT

Do not perform any operation, change or repair except those indicated by this manual.
Only skilled technical staff or staff authorized by the manufacturer have the necessary know-how of the system and the experience
to correctly perform any operation.
warning
IMPORTANT
All maintenance staff must comply with safety regulations and must wear protection gloves and shoes to move or remove objects
that could be harmful.
warning
WARNING
All maintenance operations must be performed with the system in the" safety stop" condition and disconnected from all power and
supply sources.
MAINTENANCE
Immediately repair possible failures or damages to covers and electric appliances.
OPERATIONS BEFORE COMMISSIONING:
• General visual inspection (evident warps or damages of structure, protections, etc.);
• Check of the conditions of the power supply cable.
The softener does not require any kind of ordinary maintenance but the check and refill of salt.
The hour set must correspond to current time. It is important to check the softener periodically to safeguard the efficiency
of connected devices.
These operations include checking water hardness and input and output capacity, the right execution of the different stages
and the conditions of resins to replace them if necessary.
warning
DANGER
Never perform the operations above with wet or damp hands.
8