REPA MATIC Serie Manuel D'instructions page 4

INSTRUCTIONS FOR USE
DESCRIPTION OF AUTOTROL 460TC TIMER
The system has a valve with a timer where all operation controls are located.
CONTROLS
A Led light on indicator of PM day time
B Hour Time Display
C Access Door
D Raised Tab
E Jumper
F Spare Jumper
G Transformer Plug Receptacle
H Time Set Button
I Timer locking pin
L Indicator Knob
SETTINGS
Plug the wall-mount transformer into a functioning electrical outlet that is not controlled by a switch.
Plug the transformer into the transformer plug receptacle on the control.
Open the access door by pushing the raised tab on the door toward the left while pulling the tab out
(PICT. 1).
Once the current time has been set, the timer will automatically start regeneration on the selected days at 2 am.
In order to perform regeneration at different times from the settings, it is necessary to advance/forward the displayed hour
from the current time.
If you want to calculate regeneration frequency, see the following chart, taking into account water hardness and daily
consumption.
MODEL L RESIN CONTAINED
MATIC 5 4
MATIC 8 6
MATIC 12 8
MATIC 16 13
MATIC 20 15
4
L
30°F 40°F
666 500
1000 750
1350 1000
2150 1620
2500 1870
A B
PICT. 1
I H
50°F
400
600
800
1300
1500
C D
E
F
G
60°F
330
500
650
1080
1250