Alarm Menu - Vestfrost ULTF 40 VTS098 Notice D'utilisation

EN
drive is used it can cause a reset of the
controller.
How to enter the Graph:
1� Enter the DATA menu
2� Select GRAPH sub-menu
3� Push the ENTER key and the GRAPH
menuis entered�
4� By UP and DOWN keys chose the probe
that has to be displayed�
5� Push the HOME key to get back to the
main view�
NOTE: A graph is erased when the control-
ler is switched off.

Alarm menu:

If the alarm icon is flashing on the main dis-
play, an alarm is occurring�
If the alarm icon is displayed but not flashing
on the main display, an alarm is occurred and
recovered�
Once the alarm signal is detected the buzzer
can be silenced by pressing any key�
Active alarms:
1� Push the ALARM key to enter the alarm
menu�
2� The alarm menu displays the active alarm
with the following layout:
a� First column
b� Second column = alarm description�
3� Push the LOG button to enter the
ACTIVE ALARM LOG�
This menu contains all the information
concerning the active alarms� In the first
line, it is displayed how many alarms are
happening�
4� It's possible to move through the alarms by
the UP and DOWN keys�
5� Push the LOG button to enter the ALARM
LOG� This menu contains all the memo-
rized alarms� For each alarm the starting
time and date and the finish time and date
are recorded�
Vestfrost Solutions
= alarm code
27