Selecting The Abs Functions - MV Agusta 800 DRAGSTER 2014 Manuel D'utilisation

4.4.7. Selecting the ABS functions

Press "SET" in order to access to "ABS" mode;
"SETTING ABS" appears on the display.
WARNING
The display modes may be changed or set
when the engine is off, the gear in neutral, the
motorbike stationary with your feet on the
ground. Do not change the display while dri-
ving.
Press "OK" for less than three seconds: "ABS ON"
starts blinking on the display.
If you do not press any button, after three seconds
the "ABS ON" selection is confirmed; under this condi-
tion, the ABS system is activated. Press "SET" to exit
the "ABS" mode.
OPERATION
- 57 -
4
4