Selecting The Display Functions - MV Agusta F4 frecce tricolori Manuel De L'utilisateur

4.4.1. Selecting the display functions

The following settings may be changed
on the display:
• "RUN" (Odometer)
• "TC" (Traction control)
• "CHRONO" (Chronometer)
• "NIGHT/DAY" (Night/Day Mode)
4
To display the operating modes, press
"SET" for less than four seconds. When
pressed, the display shows all modes in
a sequence. Select the desired mode.
OPERATION
WARNING
The operation must be performed while the engine is
not running, the gears are in neutral, the motorcycle
is stationary, and with the feet on the ground. Do not
set the display functions while riding.
- 36 -
4