Rampage Products 68111 Instructions D'installation page 6

Fabric Installation
2
Insert the front of the top into the Windshield Channel. Connect snaps at corners of main
skin to corners of windshield frame.
See Figure 3
Insert rear corners of top into rear cvorner Belt Rail.
See Figure 4
Figure 3
3
Pull the bottom of the rear support bow
back until it snaps into the notch in the Side
Belt Rail. See Figure 5
NOTE: Bow must slip into notch in Side
Belt Rail.
4
Push the Spreader Bars up until they snap
into place. Reinsert locking pin.
See Figure 6
Figure 4
Figure 5
Figure 6
Page 6 of 9