AUTO-HAK F26A Instructions De Montage page 5

Towbar accessories:
Towing hitch (without electrical set)
F26A
Cat. no.
Class: A50-X
Designed for:
Peugeot 807 – 5 doors, VAN
Fiat Ulysse – 5 doors, VAN,
Citroen C8 – 5 doors, VAN,
Lancia Z – 5 doors, VAN
produced since 2002
Approval number according to Directive 94/20/EC: e20*94/20*0800*00
This towbar is designed according to rules of safety traffic regulations. The towing
hitch is a safety component and must be installed only by qualified personnel. Any
alteration or conversion to the towing hitch is prohibited and would lead to
cancellation of design certification. Remove insulating compound and underseal
from vehicle (if present) in the area of the matting surfaces of the towing hitch.
The vehicle manufacturer's specifications regarding trailer load and max. vertical
cup load are decisive for driving, and values for the towing hitch must not be
exceeded.
D-value formula:
Max trailer weight [kg] x Max vehicle weight [kg]
Max trailer weight [kg] + Max vehicle weight [kg]
PPUH AUTO-HAK S.J.
Produkcja Zaczepów Kulowych
Henryk & Zbigniew Nejman
76-200 SŁUPSK ul. Słoneczna 16K
tel/fax (059) 8-414-414; 8-414-413
E-mail: office@autohak.com.pl
www. autohak.com.pl
Technical data:
D-value: 10,45 kN
maximum trailer weight: 1850 kg
maximum vertical cup load: 76 kg
Foreword
9,81
= D [kN]
X
1000