AGA MARVEL MP42SS2 Instructions D'installation, D'utilisation Et D'entretien page 9

Settings and Functions
Max Refrigerator Mode
Max refrigerator mode adjusts the refrigerator temperature to the coldest setting for four hours, at the end of which the
refrigerator's temperature automatically returns to its previous setting.
To activate the max refrigerator mode, simply press the "ACTIVATE CONTROLS" pad, followed by the "MAX REF" pad.
The "MAX REF" light will glow to let you know you've turned on the max refrigerator mode.
To deactivate the max refrigerator mode before the end of the four hour cycle, press the "ACTIVATE CONTROLS" pad,
followed by the "MAX REF" pad.
Max Freezer Mode
Max freezer mode adjusts the freezer temperature to the coldest setting for 6 hours, at the end of which, the freezer
temperature automatically returns to its previous setting.
To activate the max freezer mode, press the "ACTIVATE CONTROLS" pad, followed by the "MAX FRZ" pad. The
"MAX FRZ" light will glow to let you know you have turned on the max freezer mode.
To deactivate the max freezer mode before the end of the 6 hours cycle, simply press the "ACTIVATE CONTROLS" pad,
followed by the "MAX FRZ" pad.
Door Open Alarm
Door open alarm sounds and the "DOOR OPEN" light blinks if either door is left open for more than three minutes.
To deactivate the door open alarm, press the "ALARM OFF" pad or close the door that is open.
High Temperature Alarm
High temperature alarm sounds and the "HIGH TEMP" light glows if the refrigerator or the freezer temperature is too
high for two hours. A blinking light signals which part of the appliance is affected. The alarm sound will end when the
temperature is brought back to a proper setting.
To deactivate the high temperature alarm, press the "ALARM OFF" pad.
Power Loss Alarm
No alarm sounds, however, the "POWER" indicator fl ashes indicating a power loss. Press "ALARM OFF" to clear.
Temperature Sensor Alarm
Temperature sensor alarm is a special feature that electronically senses temperature sensor problems. The temperature
sensor alarm will sound and the display will show either oPn or Shr. The alarm can be deactivated by pressing the "Alarm
Off" pad on your refrigerator's control panel. If the display does not return to showing the temperature, contact an
authorized technician immediately.
Display
To activate temperature display, press the "ACTIVATE CONTROLS" pad.
To deactivate temperature display, press the "ACTIVATE CONTROLS" pad, followed by the "DISPLAY OFF" pad.
Sabbath Mode
Sabbath mode is used to disable interior lights and alarms for observance of the Sabbath.
Before the Sabbath mode is engaged, the ice maker bale arm (see p. 12) needs to be raised until it clicks into the detent.
This turns off the power to the ice maker.
To enter Sabbath mode, press the "ACTIVATE CONTROLS" pad to activate the control panel. Then, press and hold
"Activate Controls" and "Display Off" pads simultaneously for three seconds. It will beep three times and light the SAB
indicator so you will know that you have activated Sabbath mode.
When your refrigerator is in Sabbath mode, interior lights, display (excluding SAB indicator, temperature, and compartment
indicator), and alarms are disabled.
If your refrigerator loses power while in Sabbath mode, it will return to the Sabbath mode when power is reestablished.
To exit the Sabbath mode, press the "ACTIVATE CONTROLS" pad. Then, press and hold "ACTIVATE CONTROLS" and
"DISPLAY OFF" pads simultaneously for three seconds. You will then hear three beeps letting you know that you have turned
the Sabbath mode off.
Once your refrigerator has left the Sabbath mode, the bale arm of the ice maker needs to be pushed downward until it is no
longer in the detent. This will restore power to the ice maker.
9