Router Reset - Conrad N150 Mode D'emploi

13. Router Reset

There are two ways for resetting the router to the factory settings.
• Press the Reset button on the back of the router:
Keep the button "WPS/Reset" pressed for approx. 5-8 seconds until the "Router Mode LED"
and the "WLAN LED" go out. Release the button.
The router restarts. This may take up to 30 seconds. Then the device is reset to factory
settings.
• In the router's webinterface:
Click "Admin" in the webinterface and then "Factory-Defaults". To reset, click "RESTORE..."
and then confirm with "OK". After restart, which may take up to 40 seconds, the router is in
the state at delivery again.
• Observe that the router access information and operating mode are also reset (all other
settings are deleted as well):
Type of operation
IP-Address
User name/password
46
3G Wireless Mode
192.168.0.1
admin/admin