Honeywell THE DOCTOR'S CHOICE HPA060 Serie Mode D'emploi page 3

OPERATION
This product earned the ENERGY STAR rating by meeting strict energy efficiency guidelines set by
the U.S. EPA. The U.S. EPA does not endorse any manufacturer claims of healthier indoor air from
the use of this product.
Portable air purifiers are more effective in rooms where all doors and windows are closed. In general,
it is recommended that you run your air purifier while you are at home to clean the air.
HPA060 Series Operation:
• Once you have removed the protective wrappers from the filters
and have installed them in the unit, ensure the air purifier's control
knob is turned to the OFF postion and plug the power cord into a
working outlet.
• Select desired cleaning level by turning knob to Germ, General
Cleaning, or Allergen setting.
• The Allergen setting will effectively help reduce airborne
allergens from the air.
• The General Clean setting is best for capturing airborne
particulate matter for general, everyday cleaning and odor reduction.
• The Germ setting will help maximize the air purifier's ability to
capture airborne germs.
Model HPA160 Series Operation:
• Once you have removed the protective wrappers from the filters
and have installed them in the unit, plug the power cord into a
working electrical outlet.
• Select cleaning level by simply TAPPING the power icon (
toggle through setting options. The blue LED light will illuminate
the selected setting. TAPPING the Power button will also shut
the unit OFF after moving through the cleaning settings.
• The Allergen setting will effectively help reduce airborne
allergens from the air.
• The General Clean setting is best for capturing airborne
particulate matter for general, everyday cleaning and odor reduction.
• The Germ setting will help maximize the air purifier's ability to
capture airborne germs.
HPA160 series models have a Turbo Setting option. (Not available on the HPA060 Series):
To select the Turbo setting, push the Turbo button (
The Turbo LED lights will illuminate (Fig. 4). When the air has been cleared, push the Turbo button again
and the air purifier will return to the previously selected cleaning level.
Using the Timer Option (Not available on the HPA060 Series):
The HPA160 series models also have an Automatic Shut-off Timer option. If you would like the unit to
automatically shut off after a specific period of time, push the Timer button (
select 2, 4 or 8 hours. The air purifier will automatically shut off after the selected time period.
• To set the unit for Automatic Shut Off, push the Auto-off Timer icon (
• Continue to push the timer button to toggle through to the desired time setting.
• An LED light will illuminate under the hour setting to indicate the selected run time.
• The unit will automatically shut off after the indicated run time.
4
Fig. 3 HPA060 Control Panel
) to
Fig. 4 HPA160 Control Panel
).
) and toggle through to
).
ELECTRONIC FILTER CLEAN REMINDER
These air purifier models each have two electronic filter
checks to remind you when to check and replace the True
HEPA filter(s) and Household Gas & Odor Reducing pre-filter
based on the air purifier's hours of use.
When the True HEPA filter(s) need to be replaced, a red LED
light on the Check Filter(s) button will come on and remain
on until it is RESET. You may unplug the air purifier without
interrupting the filter check.
A red LED light on the "Check Pre-Filter" button will illuminate when it is time to replace the pre-filter.
You should periodically check these filters. Depending on operating conditions, the True-HEPA filters
should be replaced every 12 months, and the Household Gas & Odor Reducing pre-filter every 3 months,
especially if there have been heavy odors in the home.
To RESET Either Electronic Filter Check:
When a filter check light remains on, it is time to replace the True HEPA or Pre-filter and reset the filter
check light. With the unit powered on, press the lighted button and hold for approximately 2 seconds until
the light turns off. Depending on individual usage (environment and hours used), you may need to check
and replace filters more or less frequently.
These cleaning intervals are intended as guidelines only. Performance of any filter media is dependent
upon the concentration of contaminates going through the system. High concentrations of contaminates
such as dust, pet dander and smoking will reduce the useful performance of the filter.
NOTE: None of the filters are washable. Do not immerse them in water.
REPLACING THE TRUE HEPA FILTERS AND ODOR REDUCING PRE-FILTERS
See INSTALLATION INSTRUCTIONS on page 3 of this manual.
The True HEPA filter should be replaced one time per year for optimum performance. The replacement
filters are available in single packs and two packs.
If you would like your air purifier to remain effective at reducing household odors, and to operate most
effectively, you should replace the Household Gas & Odor Reducing Pre-filter once every 3 months. This
pre-filter is available as the Household Gas & Odor Reducing Pre-filter
or HRF-B2 (2 pack).
CLEANING AND STORAGE FREqUENTLY ASKED qUESTIONS
We recommend that you clean the air purifier at least once every 3 months and before extended storage.
Use only a dry cloth to wipe the external surfaces of the air purifier.
DO NOT USE WATER, WAX POLISH, OR ANY CHEMICAL SOLUTION.
If your Air Purifier will not be used for more than 30 days, we recommend:
• Remove the True-HEPA Filters from the unit.
• Wrap the True-HEPA Filters in an air tight plastic bag.
• Remove the Household Gas & Odor Reducing Pre-filter and place it in an air tight plastic bag.
HPA060 HPA160
Fig. 5
Will illuminate when it is time to change HEPA filters
or model HRF-B1 (single pack)
5