Zyxel PLA-407 Guide De Démarrage Rapide page 5

If none of the LEDs are on, unplug your device
and recheck your hardware connections.
Connect the PLA-407 to a
Computer
1. Use an Ethernet cable to connect the ETHERNET
port on the PLA-407 to the Ethernet port on your
computer.
2. Plug the PLA-407 into a power outlet.
3. The power (
the Ethernet (
blinking.
4. When the PLA-407 detects a
connection to another PLA-407 (or another
HomePlug AV compatible powerline adapter), the
HomePlug (
2
) LED should be on and
) LED should be on or
) LEDs turn on.
1
ENGLISH
5