Zyxel PLA-407 Guide De Démarrage Rapide page 4

This Quick Start Guide shows you how to do the
following:
1. Connect the PLA-407 to a Cable/DSL Modem or
Router (4)
2. Connect the PLA-407 to a Computer (5)
Connect the PLA-407 to a Cable/
DSL Modem or Router
1. Use an Ethernet cable to connect the ETHERNET
port on the PLA-407 to an available Ethernet port of
your modem, router or switch.
2. Plug the PLA-407 into a power outlet.
3. The power (
the Ethernet (
blinking.
4
2
) LED should be on and
) LED should be on or
1