Zyxel PLA401 v2 Guide De Démarrage Rapide page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
4 While the devices are connecting, the power (
HomePlug (
blink at the same time and the HomePlug (
red.
5 Wait for about one minute while your powerline devices
connect. The power (
ENCRYPT process times out, the HomePlug (
steady if you have a successful connection.
If the power (
probably pressed the ENCRYPT button for too
long. Try again, pressing the ENCRYPT button
for 1~2 seconds.
If the HomePlug (
devices do not light up, the powerline devices
are not connected. Repeat steps 2 and 3 in this
section. If that doesn't work, see the User's
Guide for more suggestions.
6 To add another powerline device (C) to your network,
connect it with one of the powerline devices (A or B)
ENGLISH
) lights blink. Also several times all lights
) light is steady when the
) light does not blink, you have
7
) lights on both powerline
) and
) light shows
) light is

Publicité

Table des Matières
loading

Table des Matières