Dri-Eaz LGR 7000XLi Guide D'utilisation page 13

Clean and inspect the the pump check valve. First, use
needle-nosed pliers to remove the pumpout hose from the
barbed fitting on the pump. Tuck the hose inside the back
cover housing.
5
∕
Remove the two in. bolts securing the pump mounting
16
bracket.
Slide the pump and pump bracket assembly out of the
pump well. It is not necessary to disconnect any electrical
cables.
When the pump is free of the housing, rotate it upward and
out of the pump well to more easily access the check valve.
NOTICE: Take care not to bend or damage the
"marshmallow" float assemply.
07-01776D (F412 120V) 2013-01 Warranty 07-00420 13 Dri-Eaz Products, Inc.