Bulb Replacement - Twin Star Home CFS-300-BLK Mode D'emploi

BULB REPLACEMENT

Tools Required for Assembly
Phillips Head Screwdriver
1. Loosen the Phillips head screws and
open the back panel.
3. Pinch this spring clip to loosen.
Gently turn and pull the rubber
grommet of the motor shaft.
A222
O
750W
1500W
spring clip
rubber
grommet
Clear, 40-watt, E12 socket base light bulb
(candelabra base, B bulb).
Light bulb
2. Open the back panel to access
light bulb
Light bulb retaining spring
4. Pull away the bulb retaining
spring, unscrew the old bulb,
and replace with a new 40w
candelabra bulb.
5
Flame Generator
Drive Motor
Pull
Pull
www.tsicustomerservice.com