La Boite Concept LD 120 Mode D'emploi page 35

Step 1 : Place the LD 120 loudspeaker this purpose.
on the side on a flat, soft surface.
Step 2 : Proceed with the following ins-
tallation method ( opposite page )
Step 3 : Repeat the fastening operation
for the second foot.
Step 4 : Return the device to the upright
position so that it stands on its two feet.
Step 5 : Insert the AC power cable in the
connector of the amplifier's back panel
and then plug it into an AC wall outlet.
Step 6 : Insert the AC power cable in
the rear slot of the left foot provided for
69