Care And Cleaning; Technical Data - Renkforce RF-ET17 Plus Guide D'utilisation Rapide

Care and cleaning

• Always disconnect the product from the power supply before cleaning it.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the housing or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product.
• Do not press too hard on the display or the camera lens as this may cause scratches.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to environmental protection.

Technical data

Operating voltage/current ............. 5 V/DC, 1 A
Image sensor ................................ 12 Mega pixels
Scan format .................................. max. 420 x 290 mm (A3)
Operating system required ........... Windows
32 bit only), Vista™ (32/64 bit), 7 (32/64 bit),
8 & 8.1 (32/64 bit), 10 (32/64 bit), 10S
Operating conditions ..................... 0 to +45 °C, 20 - 85 %
relative humidity (non-condensing)
Storage conditions ........................ -10 to +60 ºC, 65 ± 5 %
relative humidity (non-condensing)
Dimensions (W x H x D) ............... 270 x 85 x 375 mm (opened)
75 x 85 x 375 mm (closed)
Weight .......................................... 750 g (±10 g)
XP (Home, Pro, with SP1, SP2, SP3,
®
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capture
in electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE. *1885109_v1_0119_02_DS_m_4L_(1)