Performing A Reset; Focussing; Maintenance And Cleaning; Cleaning - Renkforce SC-12 Notice D'emploi

n) Performing a reset
• Use the MENU (4) button to select rSet in the menu and push the ENTER (7) button.
• The device performs a reset and then returns to normal operating mode.
o) Focussing
• Turn the focusing device (1) so that the projection is displayed in focus on the projection area.

12. Maintenance and Cleaning

Always observe the following safety instructions before cleaning or servicing the effect beamer:
Live components may be exposed if covers are opened or components are removed.
The device must be disconnected from all power sources before any servicing or repair work is carried out.
Capacitors inside the device may still carry voltage even though they have been disconnected from all
power sources.
Only qualified experts familiar with the hazards involved and the relevant regulations must perform repairs.
a) Cleaning
Never use any aggressive cleaning agents, cleaning alcohol or other chemical solutions, since these may
damage the casing or even impair function.
• Always disconnect the product from the power supply before cleaning it.
• Use a dry, lint-free cloth for cleaning the product.
38
All manuals and user guides at all-guides.com