Charging Your Headset - Jaybird JB200 Guide De Démarrage Rapide

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Charging your headset

Your JayBird Bluetooth
is powered by a built-in rechargeable
battery. Before using your headset for
the fi rst time, you should fully charge
the battery.
1.
Insert the headset into the Charger Dock as shown making sure
the left earpieces are pushed all the way into the charger slots (left
earpiece provides charging connection).
2.
Plug the smaller connector of the USB Cable into the DC-IN port on
the back of the Charger Dock.
3.
Plug the other end of the USB Cable into any open USB port on your
computer or into the USB port on the JayBird AC power adapter
(sold separately) and then plug the AC power adapter into an
outlet.
4.
The LED indicator on the right earpiece will glow RED during the
charge cycle (about 2 hours to fully charge). The LED will turn OFF
when fully charged.
5.
Remove headset from Charger Dock.
Note: When the battery needs to be recharged, the LED
indicator will alternate blue and red color every 5 seconds.
Adjusting the in-ear pieces for optimum fi t
You can rotate the adjustable in-ear buds 360° to achieve a diff erent fi t of the earpiece to the ear.
The default positions as shown are strongly recommended. 2 o' c lock for the leftside earpiece and 10
o' c lock for the right side earpiece.
®
Stereo Headset
EN G LI SH
CHARGE STATUS
INDICATOR
2

Publicité

Table des Matières

Dépannage

loading

Table des Matières