Desktop Installation; Rackmount Installation - Intellinet Network Solutions 561303 Mode D'emploi

8-Port Gigabit Ethernet PoE+ Switch with 2 RJ45 Uplink Ports and LCD Screen
grounding for your Intellinet data switch. If you use the chassis grounding screw, it should be wired to an object
that provides earth ground. In rackmount installations, grounding is typically provided by the metal frame of the
mounting rack.
Placement

Desktop Installation

Prior to use, it is recommended that the switch be placed/positioned on a level surface with at least 25 mm (approx.
1") of clearance for ventilation; away from sources of electrical noise: radios, transmitters, broadband amplifiers within
100 m (approx. 328') of network devices it's to be connected to. Attach the rubber feet to the bottom of each corner
of the switch to increase stability.

Rackmount Installation

The switch can be mounted in an EIA standard-sized, 19-inch rack. Attach the mounting brackets on the switch's side
panels (one on each side) and secure them with the screws provided.
Use the screws provided with the equipment rack to mount the Intellinet data switch on the rack.
PoE Status
The LCD screen displays the status of each port and provides valuable information about crucial functions of the
switch. See the description below for details.
PD Light Load Protection
Overload Protection
Over-voltage Protection
Power Usage
Total PoE
Output
Low-voltage Protection
PoE Shutoff
Short-circuit detected
PoE
Budget
Over-temperature Protection
English
3