Storage; Cleaning And Care; Warranty; Disposal - Craft Meyer 10031478 Mode D'emploi

is included) around the handlebar and brake lever, and then tightening it carefully. For motorcycles
with an integral braking system, you should use a chock on the wheel, or else secure it with a sturdy
lashing strap attached to the fork. This is to secure your motorcycle and prevent it from rolling away.
For safety reasons, never switch on the engine while the motorcycle is on the wheel roller. A second
person must always be present for support.
Always turn the wheel slowly by hand, while making sure that the tyre does not drift or slip off the
rollers and that the sidestand is standing securely on the ground.

6 | Storage

Keep the Craft-Meyer Rear Wheel Roller in its original packaging, in a dry place. The humidity must
not exceed 90% (non-condensing).

7 | Cleaning and care

If you keep your wheel roller in a room with high humidity, you should protect the visible metal parts
against corrosion using wax-based vehicle care products. Keep the rollers of the wheel roller free
from oil and grease on the outside so that no oil or grease is transferred to your tyres. You do not
need to lubricate the bearings – they are maintenance-free.

8 | Warranty

This product comes with the statutory two-year warranty. The warranty period begins on the date of
purchase. It does not cover normal wear and tear, use for anything other than the intended purpose,
or damage caused by an accident, tampering or attempted repairs by unauthorised persons or
customer service departments.

9 | Disposal

Dispose of packaging material and the product itself in accordance with applicable local
regulations.

10 | Contact

If you have any questions about the product and/or these instructions, before using the product for
the first time, please contact our Service Centre by e-mail at: service@louis.eu. We will help you as
quickly as possible. This is the best way to ensure that the product is used correctly.
Made in China
12