Figure 4.2: User Setup Menu (Administrator Only) - Avocent AUTOVIEW 2020 Guide D'installation Et D'utilisation

40 AutoView 2020/2030 Switch Installer/User Guide

Figure 4.2: User Setup Menu (Administrator Only)

User Setup menu functions (Administrator only)
The User Setup menu allows the Administrator to edit, access and/or delete a user account. The
menu is only accessible if the Enable User Account checkbox is enabled in the Security menu. The
AutoView 2020/2030 switches will have four standard user accounts, with the default names of
User1, User2, User3 and User4. Each User field displays default names that can be edited by the
Administrator. Usernames must be between 1 to 15 characters.
To edit a user:
1. Click the username of the user to be modified.
2. Click Edit to change the password of the selected user. You can also edit the username by
clicking on the username and typing a new name on the User Setup Screen.
3. Click Access to restrict port access for the selected user.
4. Click Delete to restore the selected user to the default state (default name, no password, no
port access).
5. Click OK on the User Setup screen to save changes, or click the Exit button to escape without
saving any changes.