YEAZ NAPUA EXOTRACE Mode D'emploi page 12

CAUTION: If you expose the paddleboard to the hot sun, please check the air pressure
and release some air, otherwise the material could be overstretched. The ambient
temperature affects the internal pressure of the chambers: a deviation of 1°C will result
in a pressure deviation in the chamber of +/-4 mBar (.06 PSI).
MOUNTING THE FIN
Align the fin like the two fixed fins. Loosen
the screw completely from the fin. Then
screw the loose screw slightly back into the
square nut. This makes it easier to position
the nut in the rail. Insert the nut into the
hole in the middle of the rail. Slide the
square nut into the desired position with
the help of the screw and loosen the screw
completely. The nut remains in the guide
rail. Now insert the fin with the brass bolt
in front at the opening of the rail in tilted
position, then straighten it up and push
the fin until the hole is directly above the
square nut and fix the fin with the screw.
12