YEAZ NAPUA EXOTRACE Mode D'emploi page 11

USAGE
Please do not use sharp items!
UNFOLDING THE BOARD
Find a smooth and clean surface to unfold
the hose body.
For initial inflation and to familiarise yourself
with your new product, we recommend
that you inflate it at room temperature. The
PVC material is soft, which makes it easy to
install. If the paddleboard has been stored
at a temperature below 0°C, keep it at 20°C
for 12 hours before unfolding.
OPERATING THE VALVE
To inflate the board, please remove
the safety cap of the valve. Turn it
counterclockwise to inflate the board. The
valve is opened (when deflating at the
bottom) or closed (when inflating at the
top) by a spring loaded insert. Before you
start inflating, please make sure that the
valve core needle is in the „upper" position.
If the needle is in the „down" position, press
the valve core needle and turn it clockwise
or counterclockwise until it pops up.
INFLATE
Insert the hose nozzle into the valve of the
board and turn the attachment clockwise.
After inflation, remove the hose and
close the safety cap of the valve to seal it
permanently.
Please note: The valve is only airtight if
it is closed with the valve cap. The use of
a compressor can damage your article,
all warranty claims expire when using a
compressor.
11