Attaching The Fan Blades; Installing The Mounting Plate - AirPro Progress Lighting P2590 Manuel D'installation

Attaching the Fan
Blades
Insert the blade through the slot in the housing.
Align the holes in the blade support plate, blade
and the fan motor assembly and secure with the
screw and fiber washer. (Fig. 12)
Blade support plate
Screws
Figure 12
7.
Installing the Mounting
Plate
Step 1. Remove 1 of the 3 screws from the
mounting ring and loosen the other 2 screws.
(Do not remove)
Step 2. Place the key holes on the mounting
plate over the 2 screws previously loosened from
the mounting ring, turn mounting plate until it
locks in place at the narrow section of the key
holes. Secure by tightening the 2 screws
previously loosened and the one previously
removed. (Fig. 13)
Slot
Blade
Mounting ring
Mounting plate
Screws
Figure 13